Question 1

Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor BE) A) and D)
F) A) and C)

Question 2

Commonly damaged areas of vehicles being hoisted include ________.

Accepted Answer

A)  Body panels
B)  Exhaust systems
C)  Both A and B
D)  Neither A nor BE) A) and B)
F) A) and C) C

Question 3

Tall pad extensions are used ________.

Accepted Answer

A)  To contact the pinch welds on passenger vehicles
B)  To engage the frame of trucks
C)  Both A and B
D)  Neither A nor BE) A) and D)
F) A) and C)

Question 4

When removing heavy objects that may change the center of gravity of a vehicle ________.

Accepted Answer

A)  Use tall safety stands
B)  Position hoist arms as close to vehicle corners as possible
C)  Both A and B
D)  Neither A nor BE) A) and C)
F) None of the above

Question 5

Most floor jacks have ________ casters.

Accepted Answer

A)  Eight
B)  Two
C)  Four
D)  SixE) A) and C)
F) None of the above

Question 6

Floor jacks are designed to support a load.

Accepted Answer

A) True 
 B)False

Question 7

The SAE standard for hoist location is ________.

Accepted Answer

A)  SAE-2009
B)  JRP-2184
C)  J-14302
D)  J-1980E) A) and B)
F) A) and C)

Question 8

Technician A says to never look away from a vehicle being hoisted. Technician B says that the vehicle must be raised off the mechanical locks before lowering. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor BE) None of the above
F) A) and B)

Question 9

Vehicle hoists are rated by ________.

Accepted Answer

A)  Maximum lifting capacity
B)  The maximum height a vehicle can be lifted
C)  Both A and B
D)  Neither A nor BE) A) and D)
F) B) and C)

Question 10

Proper lifting usually requires the vehicle to be ________.

Accepted Answer

A)  Positioned with the front wheel centered on the tire pad
B)  Centered in the stall
C)  Both A and B
D)  Neither A nor BE) A) and B)
F) None of the above

Question 11

Technician A says that a creeper should be stored vertically. Technician B says that a creeper should be stored on its casters. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor BE) A) and C)
F) All of the above

Question 12

Before lowering the vehicle, what should the technician do?

Accepted Answer

A)  Be sure no one will be walking under or near the vehicle
B)  Be sure nothing is underneath the vehicle
C)  Raise the vehicle enough to release the safety latch
D)  All of theseE) B) and D)
F) None of the above D

Question 13

When checking stability, how high should the vehicle be raised?

Accepted Answer

A)  About 1 foot (30 cm) 
B)  About 2 inches (5 cm) 
C)  About 3 feet (91 cm) 
D)  About 6 inches (15 cm) E) All of the above
F) C) and D)

Question 14

A creeper should be stored ________.

Accepted Answer

A)  Upside down on the floor
B)  Flat on the floor
C)  Vertically
D)  Under a vehicleE) All of the above
F) C) and D) C

Question 15

Pad extensions may be needed when hoisting what type of vehicle?

Accepted Answer

A)  Small cars
B)  Pickup trucks
C)  Vans
D)  Either B or CE) A) and D)
F) C) and D)

Question 16

What can be used to prevent damage to vehicle components?

Accepted Answer

A)  The correct size lift pads
B)  A block of wood used with jack stands
C)  Both A and B
D)  Neither A nor BE) None of the above
F) A) and B)

Question 17

Which symbol is used to indicate safe lifting points?

Accepted Answer

A)  Square
B)  Circle
C)  Triangle
D)  None of theseE) None of the above
F) A) and D)

Question 18

The proper height for lifting should place the work area ________.

Accepted Answer

A)  Over the technicians head
B)  At chest level
C)  Near the floor
D)  None of theseE) B) and C)
F) A) and D)

Question 19

Technician A says that drive-up ramps may shift and "kick out" allowing the vehicle to drop unexpectedly. Technician B says that the wheels should always be chocked when using ramps. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor BE) C) and D)
F) A) and D)

Question 20

Tall safety stands would be used to ________.

Accepted Answer

A)  Help support the vehicle when a major component is removed from the vehicle
B)  Lift a component such as an engine high off the ground
C)  Lift a vehicle
D)  Both B and CE) A) and C)
F) C) and D)

Exam 11: Vehicle Lifting and Hoisting

Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct?

Correct AnswerverifiedShow Answer

Commonly damaged areas of vehicles being hoisted include ________.

Correct AnswerverifiedC

Tall pad extensions are used ________.

Correct AnswerverifiedShow Answer

When removing heavy objects that may change the center of gravity of a vehicle ________.

Correct AnswerverifiedShow Answer

Most floor jacks have ________ casters.

Correct AnswerverifiedShow Answer

Floor jacks are designed to support a load.

Correct AnswerverifiedShow Answer

The SAE standard for hoist location is ________.

Correct AnswerverifiedShow Answer

Technician A says to never look away from a vehicle being hoisted. Technician B says that the vehicle must be raised off the mechanical locks before lowering. Which technician is correct?

Correct AnswerverifiedShow Answer

Vehicle hoists are rated by ________.

Correct AnswerverifiedShow Answer

Proper lifting usually requires the vehicle to be ________.

Correct AnswerverifiedShow Answer

Technician A says that a creeper should be stored vertically. Technician B says that a creeper should be stored on its casters. Which technician is correct?

Correct AnswerverifiedShow Answer

Before lowering the vehicle, what should the technician do?

Correct AnswerverifiedD

When checking stability, how high should the vehicle be raised?

Correct AnswerverifiedShow Answer

A creeper should be stored ________.

Correct AnswerverifiedC

Pad extensions may be needed when hoisting what type of vehicle?

Correct AnswerverifiedShow Answer

What can be used to prevent damage to vehicle components?

Correct AnswerverifiedShow Answer

Which symbol is used to indicate safe lifting points?

Correct AnswerverifiedShow Answer

The proper height for lifting should place the work area ________.

Correct AnswerverifiedShow Answer

Technician A says that drive-up ramps may shift and "kick out" allowing the vehicle to drop unexpectedly. Technician B says that the wheels should always be chocked when using ramps. Which technician is correct?

Correct AnswerverifiedShow Answer

Tall safety stands would be used to ________.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified
C

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
D

Correct Answer
verified

Correct Answer
verified
C

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified